| Last Modified: 11-29-2007 | 1.6 D | |
| Service Category: Vehicle Interior | Section: Meter/Gauge/Display | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000002Z4T004X |
| Title: METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: CUSTOMIZE PARAMETERS (2008 Sequoia) | ||
CUSTOMIZE PARAMETERS
1. CUSTOMIZING FUNCTION WITH TECHSTREAM
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream ON.
(d) Enter the following menus: Customize Setting.
(e) Select the setting by referring to the table below.
Warning
|
Display (Item) |
Default |
Content |
Setting |
|---|---|---|---|
|
Key Remind Volume |
Large |
To change volume of key reminder buzzer |
Large/Small/Medium |
|
Key Remind Sound |
Slow |
To change frequency of key reminder buzzer |
Normal/Slow/Fast |
|
Driver Side Seatbelt Warning Buzzer |
ON |
To change setting of driver side seat belt warning buzzer |
ON/OFF |
|
Front Passenger Side Seatbelt Warning Buzzer |
ON |
To change setting of passenger side seat belt warning buzzer |
ON/OFF |
2. CUSTOMIZING FUNCTION WITH MULTI-INFORMATION DISPLAY (w/ Multi-information Display)
(a) Using the SETUP switch and SELECT switch, the following functions can be customized through the multi-information display. Refer to the illustration below.
- Unit setting
- Wireless door lock control system (answer-back function, automatic lock function, 2-step unlock function)
- Power door lock control system (automatic door lock function, automatic door unlock function)
- Lighting system (auto light turn off function)
- Default setting (customize setting cancel function)
HINT:
*: When setting change operation is performed by SELECT switch, writing of customized value must be performed.
|
|